Serial commands to: Enable/Disable Railcom Cutout

Serial command to Enable/Disable Railcom cutout. Available on Arduino Mega based EX-CommandStations only.

<C RAILCOM onOff>

Command

• <C RAILCOM onOff> = Enable/Disable Railcom cutout.

Parameters

• onOff One of:
  • ON: Enable
  • OFF: Disable

Response

<* Railcom ON *> or <* Railcom OFF *>

---

Notes

• These commands are available on Arduino Mega based EX-CommandStations only.

---

Examples

Example Commands

• TODO LOW - Example Commands

Example Responses:

• TODO LOW - Example Responses