Serial commands to: Set DCC speed commands number of steps¶
Serial command to set DCC speed commands number of steps.
<cmd SPEED28>
<cmd SPEED128>
Commands¶
<C SPEED128>= Set all DCC speed commands to 128 step (default)<C SPEED28>= Set all DCC speed commands as 28 step to old decoders
Parameters¶
none
Response¶
Response sent to the Serial Monitor only (not WiFi clients).
One of:
- 28 Speedsteps
- 128 Speedsteps
Notes¶
- Default for the EX-CommandStation is 28 Steps
- Responses are sent to the Serial Monitor only (not WiFi clients).
Examples¶
Example Commands¶
<C SPEED128>Set all DCC speed commands to 128 step (default)<C SPEED28>Set all DCC speed commands as 28 step to old decoders
Example Responses:¶
N/A