Serial commands to: Send up to 6 byte DCC packet to MAIN or PROG¶

Serial commands to Send up to 6 byte DCC packet to MAIN or PROG.

<M «ignore» «d0» «d1» [«d2» [«d3» [«d4» [«d5»]]]]> <P «ignore» «d0» «d1» [«d2» [«d3» [«d4» [«d5»]]]]>

These commands can reprogram your decoders

THESE ARE FOR DEBUGGING AND TESTING PURPOSES ONLY. DO NOT USE UNLESS YOU KNOW HOW TO CONSTRUCT NMRA DCC PACKETS - YOU CAN INADVERTENTLY RE-PROGRAM YOUR DECODERS

Commands¶

<M «ignore» «d0» «d1» [«d2» [«d3» [«d4» [«d5»]]]]> = Send up to 6 byte DCC packet on MAIN track
<P «ignore» «d0» «d1» [«d2» [«d3» [«d4» [«d5»]]]]> = Send up to 6 byte DCC packet on PROG track

Parameters¶

ignore: Required but not used
d0..D1: values in hex to send
d2..D5: values in hex to send

Response¶

none

Notes¶

TODO LOW - Notes

Examples¶

Example Commands¶

TODO LOW - Example Commands

Example Responses:¶

N/A