<s>   <#>
<C RESET> <D RESET>
Query or Reset the EX-CommandStation

Serial commands to query or reset the EX-CommandStation

Commands

• <s> Request the EX-CommandStation status
• <#> Request the number of simultaneously supported locos
• <C RESET> Reset and restart EX-CommandStation
• <D RESET> Reset and restart EX-CommandStation
• <J I> Report currents
• <c> (Deprecated) Report main track currect

Parameters

N/A

Responses

Response for <s>

<iDCCEX version / microprocessorType / MotorControllerType / buildNumber>
plus (repeated for each defined Turnout/Point): <H id state>

• version: **EX-CommandStation version
• microprocessorType: microprocessor type (e.g. MEGA)
• MotorControllerType: Motor Driver type (e.g. STANDARD_MOTOR_SHIELD)
• buildNumber: EX-CommandStation build number
• id: unique identifier for the Turnout/Point
• state: one of:
  • 1 = thrown
  • 0 = Closed

Response for <J I>

TODO Response for <J I>

Response for <c>

<c "CurrentMAIN" current C "Milli" "0" max_ma "1" trip_ma>

• CurrentMAIN: Static text for software like JMRI (in quotes)
• current: Current in MilliAmps
• C: Designator to signify this is a current meter (V would be for voltage)
• **Milli: Unit of measure for external software with a meter like JMRI (Milli, Kilo, etc.) (in quotes)
• 0: numbered parameter for external software (1,2,3, etc.) (in quotes)
• max_ma: The maximum current handling of the Motor Driver in MilliAmps
• 1: number parameter for external software (we use 2 parameters here, 0 and 1) (in quotes)
• trip_ma - The overcurrent limit that will trip the software circuit breaker in mA

Response for <#>

<# noCabs>

• noCabs: maximum number of Cabs(Locos) supported by the EX-CommandStation

Notes

• TODO Notes

---

Examples

Also search for 's' or search for 'D' or search for 'J I'

Example Commands

• TODO LOW - Example Commands

Example Responses:

• TODO LOW - Example Responses