Serial commands to: Set signal colour¶
Serial command to set the colour of a signal.
</ RED «signal»>
</ AMBER «signal»>
</ GREEN «signal»>
Commands¶
</ RED «signal»>= Set signal colour</ AMBER «signal»>= Set signal colour</ GREEN «signal»>= Set signal colour
Parameters¶
- signal: defined red Vpin of the signal to control
Response¶
none
Notes¶
- regardless of the colour you wish to set, the signal parameter is always the Vpin of the red LED.
Examples¶
Example Commands¶
- TODO LOW - Example Commands
Example Responses¶
N/A