Message on Overload or Short Circuit

ONOVERLOAD(output) will start a sequence when an overload or short circuit is detected on the track/output.
MESSAGE(message) will display a message on all throttles.
AFTEROVERLOAD(output) will continute the sequence at this point after the overload or short circuit is cleared.

ONOVERLOAD(A)
  PRINT("Overload Detected on A")
  BROADCAST("Overload Track A")
  MESSAGE("Overload Track A")
  AFTEROVERLOAD(A)
    DELAY(2000)
    BROADCAST("Overload Track A - Cleared")
    MESSAGE("Overload Track A - Cleared")
DONE

For tracks/outputs B-H, duplicate the entire block above and replace ‘A’ with the appropriate track/output letter.