Logo
  • Before You Begin
  • EX-CommandStation
    • Getting Started
      • Purchasing Parts
      • Initial Assembly
      • Adding WiFi
      • Install the Software
      • Choosing a Throttle (Controller)
      • Test Your Setup
      • Troubleshooting
    • Advanced Options
      • Supported Microcontrollers
        • Arduino Mega Setup
        • Arduino Uno Setup
        • Arduino Nano Setup
        • Nano Every
        • Teensy
        • Mega+WiFi Setup
      • Supported Motor Drivers
        • Arduino Motor Shield - 1.5A [RECOMMENDED]
        • Deek-Robot - 1.5A [RECOMMENDED]
        • Flashtree - 1.5A
        • DIY More L298NH - 2A
        • YFRobot L298P - 2A
        • L298N (dual) - 2A
        • Dual Module H-bridge MOSFET IRF3205 - 15A
        • Pololu MC33926 - 3A
        • MiniIBT L6201P (single) - 5A
        • BTS7960 IBT_2 (single) - 43A
        • Keyes/Fundumoto ("Beeper Board") - 2A
        • Makerfabs H-Bridge - 8A
        • Velleman KA03/VMA03 - 2A
        • DFRobot 2x2A DC Motor Shield (DRI0009) - 2A
        • Motor Driver Configuration Guide
        • High Accuracy Waveform Guide
      • Supported Connections
        • Direct Connection (USB)
        • WiFi Connection
        • Ethernet Connection
        • Bluetooth Connection
        • JMRI Connection
      • Supported WiFi Shields and Boards
        • Makerfabs ESP8266 WiFi Shield (recommended)
        • Duinopeak ESP8266 WiFi Expansion Board
        • ESP-01 and ESP-01s
        • Mega+WiFi Combo Board
        • WiFi Configuration
      • Supported Ethernet Boards
        • Arduino Ethernet Shield 2
        • Wiznet WIZ850IO
        • Sunfounder Ethernet Shield
        • Nano Ethernet Shield
      • Supported Bluetooth Boards
        • Bluetooth Boards
      • Installation Options
        • Install using EX-Installer
          • Using the Installer
          • Testing your installation
        • Install using Arduino IDE
      • Startup Configuration
      • Choosing a Throttle (Controller) - Advanced
      • DCC-EX Command Reference
      • DCC-EX Command Summary
  • EX-Installer
    • Using the Installer
    • Testing your installation
  • EX-WebThrottle
  • EX-RAIL (Automation)
    • Overview
    • Editing myAutomation.h
    • Objects - an Introduction
    • Sequences - an Introduction
    • Example Objects and Sequences
    • Tips and Techniques
    • EX-RAIL Detailed Reference
    • EX-RAIL Command List
    • About and History
  • EX-Turntable
    • Overview
    • Purchasing
    • Assembly & Setup
    • Testing, Tuning, and Control
    • Layout Connections and Wiring
    • Configuration options
    • EX-Turntable FAQ and Troubleshooting
    • Traversers and Limited Rotation Turntables
  • EX-DCCInspector
  • Troubleshooting & Getting Help
    • EX-CommandStation
      • Frequently Asked Questions (FAQ)
      • Diagnosing Basic Problems
      • Troubleshooting
    • EX-Turntable FAQ and Troubleshooting
    • Contact Us
    • Submit a Support Ticket
  • The Big Picture
    • How it All Works Together
    • Stage 1 - Running a Train
    • Stage 2 - Adding a Roster
    • Stage 3 - Turnouts/Points, Accessories, Sensors & Blocks
    • Stage 4 - Automation
    • Stage 5 - Turntables & Traversers
      • Example - Turntable ROUTEs
      • Example - Turntable and traverser ROUTEs
    • Stage 6 - Putting it all Together
      • Example 1 ROUTEs with turnouts/signals
      • Example 2 ROUTEs with turnouts/signals
      • Example 3 ROUTEs with turnouts/signals
      • Example 4 Full automation with turnouts & signals
      • Example 5 Full automation with turnouts & signals
      • Example 6 Full automation with turnouts & signals
      • Example 7 Full automation with turnouts & signals
  • Throttles (Controllers)
    • WiThrottle Server, Web Server, DCC++ API Explained
    • Throttles (Software)
      • EX-Web-Throttle
      • JMRI
      • Engine Driver (Android)
      • DCCpp CAB (android)
      • Cab Engineer: DCC Throttle (Android)
      • DigiTrainsPro (Android)
      • WiThrottle (iOS)
      • Locontrol (iOS)
      • SRCP Client (iOS)
      • RtDtive DCC++ (Android)
      • Train Driver (iOS)
    • Throttles (Hardware)
      • miniThrottle (Physical)
      • WiTcontroller (Physical)
      • Adding a Physical Knob
      • Elgato Stream Deck
      • TCS UWT-50 (Physical)
    • Technical Reference for Throttle Developers
  • Downloads
    • EX-CommandStation
    • ESP8266 (WiFi Boards)
    • EX-DCCInspector
    • EX-Turntable
  • Reference
    • Glossary
    • Videos
    • Documents and Schematics
      • Documents
      • Schematics
    • Hardware
      • DCC Track Wiring Information
      • Power Supplies
      • Microcontroller Boards
        • Arduino Mega Setup
        • Arduino Uno Setup
        • Arduino Nano Setup
        • Nano Every
        • Teensy
        • Mega+WiFi Setup
      • Supported Motor Drivers
        • Arduino Motor Shield - 1.5A [RECOMMENDED]
        • Deek-Robot - 1.5A [RECOMMENDED]
        • Flashtree - 1.5A
        • DIY More L298NH - 2A
        • YFRobot L298P - 2A
        • L298N (dual) - 2A
        • Dual Module H-bridge MOSFET IRF3205 - 15A
        • Pololu MC33926 - 3A
        • MiniIBT L6201P (single) - 5A
        • BTS7960 IBT_2 (single) - 43A
        • Keyes/Fundumoto ("Beeper Board") - 2A
        • Makerfabs H-Bridge - 8A
        • Velleman KA03/VMA03 - 2A
        • DFRobot 2x2A DC Motor Shield (DRI0009) - 2A
        • Motor Driver Configuration Guide
        • High Accuracy Waveform Guide
      • WiFi Boards
        • Makerfabs ESP8266 WiFi Shield (recommended)
        • Duinopeak ESP8266 WiFi Expansion Board
        • ESP-01 and ESP-01s
        • WangTongze Board
        • Mega+WiFi Combo Board
        • SparkFun Thing Plus (ESP32)
        • ESP32_Ant-01 Breakout and Development Board (ESP32)
        • HC-12 Wireless Bridge
      • Ethernet Boards
        • Arduino Ethernet Shield 2
        • Wiznet WIZ850IO
        • Sunfounder Ethernet Shield
        • Nano Ethernet Shield
      • i2c Hardware
        • i2c Displays
        • i2c Devices
        • i2c GPIO Expander Modules
        • Connecting a Servo Module
      • Other Boards
        • IR Sensor Boards
      • Accessory Controllers
      • Decoders
        • List of Tested Decoders
        • Decoder Notes
    • Software
      • Programming Locos (CVs)
    • DCC++ Commands
      • DCC-EX Command Reference
      • DCC-EX Command Summary
    • Developer and API reference
      • Technical Reference for Throttle Developers
      • CommandStation-EX API Reference
      • DCC-EX HAL Architecture
      • I/O Device Drivers and HAL
      • Writing a HAL Driver
    • DCC-EX Third Party Suppliers
      • Full Command Stations
      • Cases / Enclosures
    • Diagnostic Tools
      • Using a Serial Monitor
      • Diagnostic d Commands
        • Diagnostics <D ACK> Command
        • Diagnostics <D> Command
      • DCC Diagnostic Tools
  • Related Projects
    • RailSnail’s Complete Bluetooth EX-CommandStation
    • miniThrottle (Physical)
    • WiTcontroller (Physical)
    • Elgato Stream Deck
  • About, Press & Contributing
    • About Us - Meet the Team
    • Press / Announcements
      • DCC++ VS DCC-EX? [Oct 2022]
      • EX-CommandStation 4.0 Release [Feb 2022]
      • Release Notes [Feb 2022]
      • Our New Name [Aug 2022]
    • Donate to Our Project
    • Contributing - Helping the DCC-EX Team
      • Overview
      • GitHub
      • What You Need to Know/Learn
      • Recommended Software
      • Contributing to the Hardware & Software
      • Contributing to the Documentation
        • Getting Started
        • Folder and Page Structure
        • ReStructuredText Basics
        • Style Guide
    • Licence & Attributions
    • DCC-EX Roadmap
    • Site Map
DCC-EX Model Railroading
  • »
  • Reference
  • Edit on GitHub

Reference

Reference

Conductor Hat Propeller Beanie Engineer Hat

Glossary

  • Glossary

Videos

  • Videos

Hardware, Software, tools

  • Documents and Schematics
  • Hardware
  • Software
  • DCC++ Commands
  • Developer and API reference
  • DCC-EX Third Party Suppliers
  • Diagnostic Tools
Previous Next

© Copyright 2020-2022 - Fred Decker, Mani Kumar.

Built with Sphinx using a theme provided by Read the Docs.